How To Use Mic On Logic Pro X

Trying to learn to utilise Logic Pro Ten? Yous're in luck.

It may seem complicated right at present, but past reading this guide, you'll learn everything you need to know to plow your ideas into full songs.

We're covering ALL the basics of this incredible DAW.

Contents

Exercise you desire to make coin from your music?
Logic Pro X Tutorial (Everything You Need To Know)
Part 1: Getting Comfy with Logic'south Visual Interface
- The Primary Interface
- The File Menu
- Next, Check Your Audio Preferences
- Key Commands: The Ultimate Fourth dimension Saver
Role 2: Recording Audio Tracks Logic Pro 10
- Of import: Record Enabling and Input Monitoring
- Recording Multiple Takes
Part 3: Editing Sound Tracks Logic Pro X
- The Inspector View
- Adding Fades in Logic Pro X
- Bonus Tip: Adjusting the Waveform View
Part 4: Mixing Audio Tracks Logic Pro 10
- Sends and Aux Tracks
Part 5: Using the Stereo Output Channel
Part 6: Recording MIDI
Role 7: Using the MIDI Editor Window
- Quantizing MIDI
Function 8: Making MIDI Sound Realistic
- Quantization Strength
- Changing the Velocity of MIDI Notes
- Humanization
Part nine: Quick and Easy Drums with Logic Pro's Drummer
- Making Your Drummer Track Feel More Lifelike
Part 10: Using Your Own Samples in Logic
Part 11: Getting Creative with Apple Loops
- And that's just the beginning!
Conclusion: Logic Pro Tutorial
Practice you lot want to make money from your music?

Do you want to make coin from your music?

You lot don't need expensive gear, connections, or god-like knowledge to kickstart your career.

This costless Masterclass reveals the fundamental steps yous Actually need to brand a reliable income doing what you love in 2021.

Take hold of the full Masterclass here:

But if you lot just want to learn about Logic Pro specifically, continue reading.

Logic Pro X Tutorial (Everything Yous Demand To Know)

Trying to larn to apply Logic Pro X? You're in luck. It may seem complicated right now, but by reading this guide, you'll learn everything yous demand to know to turn your ideas into total songs. We're covering ALL the basics of this incredible DAW. Only if you just desire to learn near Logic Pro specifica

Function i: Getting Comfortable with Logic'south Visual Interface

Information technology'south easy to be intimidated when you open Logic Pro X for the first fourth dimension.

At that place are a lot of buttons and screens. Where do you even start?

But don't worry! Information technology's not every bit complex equally information technology first seems.

Let's intermission down the interface footstep by footstep and then you know exactly what you're looking at when y'all open a project.

We'll start with the primary interface.

The Chief Interface

Just beneath the navigation dropdowns is the chief interface.

This is where you'll make changes that affect your entire project. Ane example is changing the tempo of your song.

In that location'southward a lot to look at here, just we're only going to focus on the necessities.

Commencement things outset, bank check out the "Quick Assist" push on the left side of the screen.

Quick Help gives you a brief description of what everything on your screen does. And then if you're new to Logic Pro, yous'll want to have it on.

But hover your mouse over a button you don't understand, and Quick Assistance volition tell you exactly what it does.

To the right of Quick Assist is the playback transport. This is where you get-go and stop your vocal and even begin recording.

I adopt to utilize key commands for all these functions. We'll dig into central commands at the terminate of this department!

In the middle of the main interface is the LCD. If you desire to change the tempo, key, or fourth dimension signature of the song, you can do that in this center section.

You tin brand this window bigger if you lot'd similar. Click the dropdown to the right and select "Beats & Project (Big)."

You can change your metronome settings to the correct of the LCD window. Clicking the metronome image will plow the metronome on and off.

I normally leave the metronome on while recording and plough it off while listening back.

The "1234" next to the metronome is your count-in. When count-in is turned on, you'll accept an extra measure out of atomic number 82-up before Logic Pro starts recording.

If you want to get-go a new project or save your current one, this is where you'll do it.

The file carte is besides where y'all'll bounce your track. Bounce is just a fancy discussion for exporting your project into a regular audio file.

You might remember you lot'd striking the "Export" button to export your track. But for some reason, "Bounce" is the actual consign push button.

Why? Sometimes the world is a lawless and irrational place.

NOTE: You tin can save a bunch of setup fourth dimension for each new projection past making a template:

Trying to learn to use Logic Pro Ten? You're in luck. Information technology may seem complicated correct now, just by reading this guide, you'll learn everything you demand to know to turn your ideas into full songs. We're covering ALL the basics of this incredible DAW. But if you just want to learn well-nigh Logic Pro specifica

Next, Bank check Your Sound Preferences

Open the "Logic Pro X" dropdown at the summit left of your screen, open the "Preferences" menu, and select "Audio."

This'll open up the audio preferences window. This is where you can change your input and output devices, which is what you're using to record and mind through.

If I'yard recording with an audio interface, I'll select my interface as my input and output device.

If y'all're listening through your computer's speakers, y'all'll want to make sure those are set as the output device.

The audio preferences window is besides where you lot can modify the buffer size. The college the buffer size, the more than fourth dimension your computer will spend processing the audio.

Choice the lowest buffer size possible while recording. A higher buffer size volition cause latency, which tin can really throw off a musical performance.

Simply be conscientious! Not all computers tin can handle extremely low buffer sizes. If you hear pops in your recording, your buffer size might be too low.

Option a buffer size that's low plenty to avert latency but also isn't so low your reckoner can't go on up. I unremarkably go with a buffer size of 64 samples per second.

When y'all're mixing, you'll want to plough the buffer size upward. Yous want the all-time sound quality possible for your mix, so pick the highest buffer size available.

Cardinal Commands: The Ultimate Time Saver

We won't go as well far in depth on these. A key command is a key (or prepare of keys) on your reckoner's keyboard that completes a specific office when pressed.

For example, pressing the command + Z buttons at the same time volition undo your previous action.

Logic Pro has a lot of key commands. Learning them volition help you work quicker, only they can take some fourth dimension to become the hang of.

Below is a list of the most important key commands you should know when yous're getting started in Logic Pro.

Using fundamental commands, y'all can commencement recording just past pressing R.

Yous can play and suspension your vocal by pressing the spacebar instead of hitting the play and stop buttons in Logic Pro.

Get comfortable with these bones key commands, and Logic Pro will experience a lot more intuitive.

NOTE: We just released a great new video on how to solve Logic's stupidest trouble, with PlugSearch:

Trying to learn to use Logic Pro X? You're in luck. It may seem complicated right now, simply by reading this guide, you lot'll acquire everything you need to know to turn your ideas into full songs. We're covering ALL the basics of this incredible DAW. But if y'all just want to acquire most Logic Pro specifica

Part two: Recording Audio Tracks Logic Pro Ten

Now that you know what you're looking at hither, information technology's time to start making some tracks.

Good news, making new tracks is super easy! Just click the "+" button that'southward below the primary interface.

A new window will pop up where you tin can choose to create an audio track or a software instrument (i.e., a MIDI channel).

For now, we're going to focus on audio channels. Make sure to double check that the input is right.

Under the word "Input," there'll be a button where you tin change your audio input. If your mic is plugged into the commencement input of your audio interface, you'll pick input 1.

Now you lot have an audio track in your project!

You tin mute and solo this channel with the "K" and "Due south" buttons. Change the volume with the fader and identify the rail further in the left or right with the pan knob.

When working with an sound runway, I like to leave the Inspector window open.

This window gives united states a ton of other options for effects. But we'll talk about that more later.

IMPORTANT: Tape Enabling and Input Monitoring

Before you commencement recording, brand sure your track is record enabled. Before Logic Pro can tape anything, you have to tell it what track(s) you want to record with.

All you have to exercise is click the "R" on your sound track. If it's red, your rails is ready to record!

But hitting R on your computer's keyboard and now you're tracking!

If you desire to hear what you're recording as yous record it, make sure the "I" push on your audio track is on. Y'all'll know it's on when it lights up orangish.

This is the Input Monitoring button. Information technology plays the audio you're recording through your output device.

While recording sound, listen to your song through headphones. If you're listening through speakers, you'll get a lot of extra noise in your recording. You lot may even create a feedback loop.

Recording Multiple Takes

Logic Pro makes it super easy to tape multiple takes.

Recording over an existing audio clip won't get rid of it. It'll add the new recording to a list of takes that you tin can choose from.

If you lot're having trouble nailing a operation, attempt recording information technology multiple times.

Say y'all mess upwards at the beginning of one take and at the stop of another. You tin cutting the two together to create 1 solid recording.

To meet all of the takes you've recorded, merely click the dropdown pointer on the track.

This arrow will automatically show up once you lot've recorded multiple takes. Clicking on a take will change which one you're listening to.

To combine recordings, click and elevate on the sections of each take you lot desire to continue. Blueish sections are audible while gray sections are muted.

One time you're happy with a combination of takes, you tin merge them into a unmarried sound file. Just click the capital "A" on the track and select "Flatten and Merge."

This'll get rid of all the other takes yous recorded, so make sure y'all're happy with the way your rail's sounding!

Trying to learn to utilize Logic Pro X? You're in luck. Information technology may seem complicated right now, simply past reading this guide, yous'll larn everything y'all demand to know to turn your ideas into total songs. We're covering ALL the basics of this incredible DAW. But if you just want to learn about Logic Pro specifica

Part iii: Editing Audio Tracks Logic Pro Ten

In one case you've laid down some audio tracks, y'all may want to change them.

For example, you may decide that your guitar part sounds meliorate in the chorus instead of the poesy.

To separate one department of a recording from the rest of the region, set up your playback caput where you lot want to split information technology. Information technology's best to dissever regions in places where the audio is mostly silent.

Then, split the region by pressing command + T at the same time. Brand certain the region you're splitting is highlighted, otherwise Logic Pro won't know what you're trying to cut!

You tin easily move a recording by clicking on it and dragging it to the left or correct. Once you've cut out the section you lot want to move, drag it where you desire information technology to go.

If the guitar part y'all've recorded simply fills up half of the section information technology's in, you don't need to rerecord it. You tin can loop the part by clicking on the meridian right corner of the region and pulling information technology out to the correct.

You tin too shorten the length of the audio file. Click on the left or correct ends of the region and pull information technology towards the middle of the region.

This tin come up in handy when you have some extra noise at the starting time or terminate of a recording that you want to become rid of.

The Inspector View

The Inspector View has some incredibly powerful options for editing your audio.

To get the most out of Inspector View, click on the arrow next to the word "Region." This'll testify you a ton of editing options.

If you want to modify the pitch of your sound, you can do then by dragging up or downward on the "Transpose" option. Each number is a semitone, so if yous want to brand a recording a full pace lower, y'all'd pull the transposition down to -2.

Ordinarily I apply this as an event. Transposing audio typically makes the sound feel a trivial more digital.

This is besides where you can add together fades to your recordings.

Click the "More" button at the bottom of the list of region options. There y'all'll find more tools, including fading in and fading out.

Calculation Fades in Logic Pro X

Let's say that guitar track we were talking about earlier has a gross buzz at the beginning. You'll probably want to add a fade in at the showtime to cut out some of that buzz.

To do this, just click and elevate upwardly next to the words "Fade In." The more you drag information technology up, the longer your fade will be.

If you decide the fade is too long, y'all tin go far shorter by dragging the value down.

Past default, the fade is linear. Usually this is fine, but sometimes you may want the fade to be less gradual.

Past changing the curve (located merely beneath the fade in section), you can brand the audio fade in slowly or suddenly.

A negative curve will fade in most of the way at the start, taking a piffling more fourth dimension to accomplish full volume.

A positive curve will be silent for most of the fade and will reach full volume quickly once it does fade in.

If your fade is the correct length, simply doesn't quite sound correct, try changing its curve.

All this info is exactly the same for fading out. Just move down to the "Fade Out" section and apply your fade at that place.

If you lot're splicing 2 audio regions together, you'll want to apply a crossfade. A crossfade will fade out the audio clip on the left at the same time every bit it fades in the clip on the right.

Without a crossfade, you'll hear a nasty pop where the ii audio regions meet.

To add a crossfade, highlight the regions you desire to combine. Then click on the "Type" button under the Inspector View's Fade Out.

At that place are a few different crossfading options. I ordinarily stick with the equal ability crossfade.

Then simply elevate the Fade Out upwards, and you'll see a fade applied to both the audio regions you've selected.

If you desire to learn more than most how you can become the well-nigh out of fading, cheque out this article.

Bonus Tip: Adjusting the Waveform View

In the upper right-mitt corner of Logic Pro, you'll see a blueish button with the paradigm of a waveform in information technology.

By clicking and holding this button, you can elevate a slider upward and downward. This will modify the size of the audio waveforms in your project.

This actually comes in handy while editing. If ane phrase of a vocal role is slightly behind the beat out, you lot tin can easily see where the singer starts and stops singing.

That way y'all tin can split the region without cutting off any of import sound!

Trying to larn to utilize Logic Pro X? You're in luck. It may seem complicated right now, merely past reading this guide, you'll learn everything you need to know to turn your ideas into full songs. Nosotros're covering ALL the basics of this incredible DAW. But if y'all just want to acquire about Logic Pro specifica

Part iv: Mixing Audio Tracks Logic Pro 10

At present that you've recorded and edited some tracks, it's time to outset thinking about furnishings.

I've got a session pulled up in forepart of me that'south sounding all right. The electric guitar is having some trouble cutting through the rest of the noise.

To help information technology polish, I want to add some distortion and EQ.

First, open up the Mix View past pressing control + 2. Here's what the Mix View looks like:

It looks like a lot at offset merely isn't as complicated every bit you might recall. Each of these vertical sections is a rails, and each track has the same mixing options.

You lot're really merely learning a few things that apply to every rails.

For now, we're but going to cover the basics of how Logic Pro's mixing interface works. Nosotros have tons of articles designed to help you strop your mixing chops.

If you want to get the near out of mixing, be sure to check out some other articles and videos from Musician on a Mission. I recommend starting hither.

Offset off, let's check out the bottom of a channel. Here you'll find your rails name, solo and mute buttons, besides every bit the channel'due south fader.

To rename a track, just double click the current name and blazon in a new one.

Every bit you might expect, pulling the channel fader up or down will increase or subtract the volume. In my case, I'1000 going to turn the guitar track up so information technology'due south more noticeable.

Right above the volume fader is a pan knob. By moving this knob all the mode to the left, nosotros'll only hear it out of the left speaker. Pulling information technology all the way to the correct volition arrive just audible from the right.

I'one thousand going to place this guitar role midway betwixt the middle and the far right. That mode it isn't fighting with the vocal for attention.

At present that the book and panning are where I desire them, let'south add an EQ to the guitar.

To put Logic Pro'south stock EQ to the track, click on the channel'southward Audio FX box. This'll open up a list of dissimilar plugins you tin use.

You can find the EQ plugin in the EQ section.

This guitar is sounding kind of muddy and isn't cut through. To help with that, I'g going to take out some of the low frequencies and add presence to the upper mids.

Need more tips on EQing? Bank check out this tutorial on EQing dissimilar instruments and this listing of common EQ mistakes.

The EQ sounds all right, only I nevertheless want to make the guitar a picayune crunchier. Past clicking below the bluish box that opens up the EQ, you'll see a dropdown list of unlike mixing plugins yous can use.

Logic Pro comes with a ton of stock plugins that are actually great.

I've picked out the "Vivid Funky Crunch" preset from Logic Pro's Clip Distortion plugin for this track.

I'm happy with how this guitar sounds, but information technology feels also close to the listener. To button the guitar dorsum in the mix, I'm going to add some reverb.

But instead of putting a reverb directly on this aqueduct, I'one thousand going to use a ship.

Sends and Aux Tracks

Sends exercise exactly what they sound like. They send a re-create of the audio from one channel to some other.

Sends are great when y'all want to put the same result on multiple instruments.

To create a send, click on the box beneath the plugin box. This'll pull upwardly a list of buses that you lot can send the audio to.

Clicking on an empty bus creates a new aux rails for you to put effects on. Aux tracks are a lot like audio tracks, only you can't record onto them.

Since I desire to put some reverb on this guitar, I'one thousand going to put the Space Designer plugin on my aux track.

Make sure you turn up the output from your ship. If y'all don't exercise this, you won't really send any sound to your aux track.

To do this, click and elevate the circle side by side to the ship. That's the knob that increases the volume of the output of your send. The greener the circle, the louder the send.

I like the reverb I've put on this guitar, but it's a bit besides much. To make it less abrasive, I've turned down the volume of the aux channel.

If you want to brand an aux effect more subtle, you tin can turn the fader of the aux channel downwards.

Trying to learn to use Logic Pro 10? You're in luck. It may seem complicated correct now, only by reading this guide, you'll acquire everything you need to know to plough your ideas into full songs. Nosotros're covering ALL the basics of this incredible DAW. Simply if y'all just want to acquire about Logic Pro specifica

Part v: Using the Stereo Output Channel

Equally y'all look at your various channels, you'll observe one called the Stereo Output.

Past default, all channels have this ready as their output. Anything yous do to this channel will affect how your entire song sounds.

If your entire mix is too serenity, you can turn it up hither.

Also, you tin add plugins that volition affect the entire mix. For example, if the entire song needs to audio darker, cutting some of the high frequencies using an EQ on this channel.

Be careful with what you lot put here, though. If you make a bad mix decision on the Stereo Output, your unabridged song mix is going to suffer.

Part half dozen: Recording MIDI

To create a MIDI track, click that "+" button nosotros used before. This time, instead of clicking on "Sound," select "Software Instrument."

Nether "Instrument." you tin choose what kind of instrument you want to utilise. For now, just open ane of the default instrument patches.

Audio engineers insist on having a fancy word for everything. Patches are the MIDI version of plugin presets.

Don't let the jargon scare you off! Information technology'southward disruptive, merely after a while information technology'll go 2nd nature.

You'll run across that you accept all the same volume and panning functions equally an audio channel. Yous'll as well demand to record enable MIDI tracks earlier recording with them.

The default patch is a nice electrical piano, but what if we desire to utilise something else? There are a couple ways you lot can change instruments.

The easiest is to open up the sound library. Clicking the library push button at the top left of the screen will show you a ton of different MIDI patches y'all can use.

Let's open a bass sound to play with.

Click on the category in the library view and open the Upright Studio Bass preset. I use this audio all the fourth dimension when I want a jazzy upright bass.

At present you lot can lay down some bass parts!

If you don't have a MIDI keyboard to tape with, hit command + Grand on your reckoner'southward keyboard. This opens Musical Typing, which'll let yous play the role on your reckoner keyboard.

I travel a lot, so I utilize Musical Typing all the time to jot ideas down while I'one thousand on the route.

Past default, Musical Typing records all the notes at the same velocity. Y'all'll need to manually edit the velocities so the part doesn't sound robotic.

But once you lot get used to writing with Musical Typing, it's honestly a great fashion to throw ideas down quickly.

If you'd rather add MIDI notes in by paw, click on the pair of scissors button in the primary transport. This opens the MIDI editor window.

Part 7: Using the MIDI Editor Window

This is the MIDI Editor Window. By default, it shows the Piano Ringlet, but you tin also look at the Score and Step Editor if you adopt to notate with those.

If you desire to do any MIDI editing, this is where you'll usually practice it. Here you lot can add together in MIDI notes by hand.

Past clicking on the image of a cursor in the editor window (or hit T on your keyboard), you can select the pencil and eraser tools. These'll permit you add and delete notes.

The brush tool is handy if you want to add a lot of curt notes in quick succession.

When the pointer tool is selected, you lot can move notes effectually past dragging them up or down.

A huge role of MIDI editing is quantizing. Quantizing automatically time-aligns MIDI notes and then y'all don't accept to spend forever dragging them into identify.

Quantizing MIDI

If your MIDI notes are out of time, endeavor quantizing them. Select all the notes you want to move and hitting Q on your keyboard. When y'all do, watch the notes snap to the grid.

Y'all can even change the subdivision you desire to quantize at. With a part that changes notes speedily, you might want to fix the subdivision to i/32 Notation. For a slow function, 1/eight Note might be better.

Setting the right note value volition make certain your notes snap to the right part of the grid.

Part 8: Making MIDI Sound Realistic

MIDI is an incredible tool, just if you aren't careful, your MIDI parts can end up sounding robotic.

Fortunately, there are a few tools nosotros can use to brand a MIDI instrument sound more similar the real thing.

Quantization Force

While quantization is great for tightening up a performance, information technology sounds a bit too flawless. Afterward all, a human wouldn't be able to play every notation perfectly on beat. To brand quantized MIDI audio more human, you lot'll want to refuse the quantization "Strength."

By default, the quantization Strength is prepare at 100. This means the MIDI notes are 100% on the shell. Past turning the Strength down, the notes volition still be mostly in fourth dimension, but won't be so robotic.

I usually set quantization Strength around 80. If I want a office to sound more loose, I'll set it somewhere between l and 70.

Another crucial part of making realistic MIDI is velocity.

Irresolute the Velocity of MIDI Notes

Velocity is just a fancy music word for volume. The velocity of a MIDI note determines how loudly and how intensely the MIDI note is played.

The college the velocity, the louder the annotation. When playing instruments, people naturally play each notation at different velocities.

So to make a MIDI role sound more than realistic, information technology's super of import that we vary the velocity.

There are a couple of different means to change the velocity of MIDI notes. 1 is by opening the MIDI Automation Window.

With the Piano Roll selected, press A. You'll run across an automation window open at the lesser of the screen.

This window has a dropdown menu with a ton of things you tin can automate. For now, we'll merely focus on the "Note Velocity" option.

By clicking and dragging the green confined here, you tin change the velocity of your MIDI notes. Yous can even draw crescendos and decrescendos by cartoon a line moving upwards or down!

This is great for editing a lot of notes at once. If you just want to edit the velocity of a couple notes, select the "Velocity Tool" in the MIDI Editor.

With the Velocity Tool on, drag the note up to increase the velocity or downwardly to decrease it.

Humanization

Humanization automatically makes modest changes to the timing and velocity of MIDI notes. To quickly get a realistic sounding performance, humanize your MIDI.

Correct click on the MIDI region you want to humanize and scroll down to the MIDI folder. Then get to the MIDI Transform binder and select "Humanize."

A window should open up that looks like this:

Past clicking "Select and Operate" at the bottom right, you'll humanize your MIDI region.

The deviation is subtle, just information technology goes a long way.

Part 9: Quick and Like shooting fish in a barrel Drums with Logic Pro'southward Drummer

If writing drum parts isn't your forte, Logic Pro'southward Drummer is a keen way to get a solid beat for your song in no time at all.

Logic Drummer is a rhythm instrument that comes with premade patterns you can use to spice your song up.

To create a Drummer track, hit the "+" push once again and select the "Drummer" on the right.

Drummer is actually powerful with plenty of flexibility. The outset thing y'all'll notice when you open Drummer is the drummer library.

Drummer comes with a bunch of different drummer profiles.

These drummers have personalities and styles. Like Rose who specializes in Modern R&B, or Aiden who plays Indie Pop.

Each drummer too has their ain unique patterns. Rose's patterns are tight and minimalistic, while Aiden'southward rhythms are loose and busier. You tin can cycle through each drummer'southward patterns by clicking on the different beat presets.

I'm a big fan of tight drum sounds, so I've chosen Rose as my drummer.

One time you've picked a drummer, you tin can change what kit they're playing.

Right beneath the list of drummers is a list of drum kits. Mind through all of them and decide which one works for you.

By default, Rose uses the "Tedious Jam" kit, but I want a drum kit with a boomier kick. Later listening through a few options, I like how the "Roots" kit sounds.

(I too chose this kit considering I'm in dearest with QuestLove. QuestLove, if you're reading this, call me).

To the right of the beat patterns, you tin can change the dynamics and complexity of your blueprint.

For a simple, serenity rhythm, move the yellow circle down and to the left. If you want a really bombastic part, pull the yellow circle up and to the correct.

Making Your Drummer Rail Feel More Lifelike

Drummer is a wonderful tool. But if yous simply keep looping the same blueprint, it'll become obvious that it'due south not a existent drummer.

Here are a few things you can do to brand Drummer sound more than similar the existent affair.

A existent drummer won't play the same pattern throughout the entire vocal. Using a unlike blueprint for the poesy than the chorus is a skilful way to push button the song frontwards.

You lot tin can fifty-fifty make the outset half of one section different from the 2d one-half. Imagine you take a poesy that'due south tranquility and laid back for the showtime 8 bars but picks upwards steam for the 2nd 8.

Press the yellowish plus sign to the correct of your pattern. This'll copy the pattern over.

Highlight the 2d blueprint. And so move the yellow circle from the dynamics and complication grid.

This'll make a slightly different pattern play during the 2nd half of the verse, edifice energy.

Y'all can also add occasional fills by turning upward the "Fills" knob. Changing the fill knob from pattern to design volition likewise add some overnice variation to your drum office.

To get more out of Logic Pro'southward Drummer, check out this tutorial that covers all of Drummer'southward basic features.

Trying to learn to utilise Logic Pro Ten? You're in luck. It may seem complicated correct now, just by reading this guide, you'll learn everything you need to know to turn your ideas into full songs. Nosotros're roofing ALL the basics of this incredible DAW. Merely if you simply want to acquire well-nigh Logic Pro specifica

UPDATE: Here's a great tutorial on how to make a beat out in Logic Pro Ten:

Trying to larn to use Logic Pro X? You're in luck. It may seem complicated right at present, but past reading this guide, you lot'll larn everything you lot need to know to turn your ideas into full songs. We're covering ALL the nuts of this incredible DAW. But if y'all just want to learn about Logic Pro specifica

Part 10: Using Your Own Samples in Logic

Logic Pro X comes with a ton of great synths and samples for you to play around with. But sometimes you may desire to apply your own samples that you've recorded or downloaded from the net.

And Logic's 10.5 update has made sampling easier than ever!

Just open upwardly a software instrument and select "Quick Sampler" from the instrument console.

Quick Sampler lets you drag and drop samples correct into information technology. It'll automatically pitch the sample up and down. Then if yous load a keyboard sample in, you tin can play it back at dissimilar notes.

The "Slice" characteristic is also very handy. It automatically chops the sample up into bite sized chunks.

This makes it super like shooting fish in a barrel to create your ain beat out of a drum loop, or chop and screw some vocals.

Dissimilar Quick Sampler, the regular "Sampler" plugin will let you use multiple samples at once.

Start, you'll want to click on "Zone."

Then, only drag and driblet your sample into the zone window.

If you desire to load multiple sounds into the sampler, you'll need to map each sound to specific keys.

For example, say you load a kicking and a snare. You'll probably want the boot to trigger when you play C1 and the snare to trigger when you play D1.

Open up up the "Mapping" bill of fare. Elevate and drop the samples in.

Then set the "Central" where you desire information technology. In this example, I'll make sure the Kick is set to C1 and the Snare is on D1.

I also recommend checking out everything else in Sampler.

Some of the presets are absolutely stellar. The solo clarinet is fire. I recommend looking through its entire library.

Trying to acquire to use Logic Pro X? You're in luck. Information technology may seem complicated right now, merely by reading this guide, yous'll learn everything you lot need to know to turn your ideas into full songs. We're covering ALL the basics of this incredible DAW. But if you just want to learn virtually Logic Pro specifica

Function 11: Getting Artistic with Apple Loops

Another style to go great sounds apace is by using Apple Loops.

Logic Pro comes loaded with a agglomeration of dainty loops that automatically match your project'southward tempo. Whether your song is fourscore BPM or 140, Apple Loops will match the tempo seamlessly.

To cheque out these loops, click on the Loop Browser button in the top right. This'll pop open a library of loops that you can use in any song.

If you're looking for something in detail, but type information technology into the loops search bar.

Pro tip: the shakers in Apple Loops are top notch. Feel similar your chorus needs some more energy? Throw a shaker loop on that bad boy and mix it in so you barely hear it. BAM. You've got an instant hit.

You can get extra creative by loading these loops into EXS24. Hither you can modify the filtering, envelopes, and LFO settings of the loop.

Mangle these settings plenty, and you might end up with a completely new audio!

And that's just the beginning!

Logic'south 10.five update brought tons of exciting new features to the DAW. Take a look at all of the new means to make music in Logic 10.5:

Trying to learn to use Logic Pro 10? Yous're in luck. It may seem complicated right at present, simply by reading this guide, you'll larn everything you demand to know to turn your ideas into full songs. We're covering ALL the basics of this incredible DAW. Just if you but want to learn most Logic Pro specifica

Decision: Logic Pro Tutorial

And there you have it! Everything you lot need to know to harness your creativity in Logic Pro X.

If you notice yourself confused near whatever of Logic'due south features, cheque back over the relevant section from this guide:

Getting Comfortable with Logic Pro's Visual Interface
How to Record Audio Tracks
Editing Audio Tracks
Mixing Audio in the Mix View
Logic Pro's Stereo Output Aqueduct
Recording MIDI
Editing MIDI
Making MIDI Sound Realistic
Using Logic Pro's Drummer for Quick and Piece of cake Drums
Importing Your Own Samples into Logic Pro
Getting Creative with Apple Loops

Exercise you want to brand coin from your music?

You don't need expensive gear, connections, or god-similar knowledge to kickstart your career.

This costless Masterclass reveals the key steps you Really need to make a reliable income doing what you beloved in 2021.

Take hold of the full Masterclass here:

Producer and composer for film and video games. Helping yous make music a little more fun and a little less tedious. Check out my piece of work at Juniper Tapes.